There are various Interior designers floor coverings, descriptions, and properties for which rooms they are suitable, expert advice, and a summary table of materials for the floor in the apartment.
An exquisite design renovation cannot exclude a beautiful floor covering. This article will tell you what kind of floors there are for an apartment with a designer renovation, their main properties, and will help the reader choose his version that suits his room. The material provides expert comments on the topic of flooring, and at the end of the article, you can see a summary table of materials for flooring in an apartment.
First of all, one must consider the cost of the floor covering, its durability, aesthetics, and, of course, safety. “There are no perfect coatings for every situation, so I would not say that some materials are good and others are bad. The choice depends on the decorative qualities, premises, budget,” says Tahir’s architect, head of the interior designers at Lahore.
Laminate is an inexpensive, practical, easy to install, and beautiful type of coating. These are boards with particular locking joints that can be assembled without the use of glue. Two panels are connected until they click, and this is how the entire covering is held together. According to Lyubov Trofimova, laminate flooring is famous as a budget alternative to parquet and engineered boards. It looks good, quite durable. Not all species tolerate the effects of water usually: for the kitchen, you need to choose a waterproof one.
Laminate is made up of several layers. There is material from wood processing waste; at the bottom, there is a protective layer, and a pattern imitating wood is located above the wood material. The upper and lower layers are waterproof and protect the fabric from abrasion, but the laminate itself between them is afraid of water, so it cannot lay in the bathroom. But in the kitchen, you can. Ideal laminate flooring will fit in the corridor, nursery, bedroom, and living room.
A good flooring board will last a long time and will not wear off. The most durable materials for floorboards are beech, ash, maple, oak, larch, spruce, and pine. Alder, walnut, and aspen are sometimes used. It is delightful to walk on a tree at home, and it is also environmentally friendly. Pine boards are easy to install, lightweight, inexpensive, and have a pleasant forest smell. But they wear out faster than other wood species. Oak is practically not erased, but it isn’t easy to process, and it is expensive.
Designers often use larch: it is suitable for both wet and dry rooms, it does not rot even without special impregnations.
There are two types of floorboards: solid and glued. Massive is cut from a solid tree trunk and glued is made up of several layers of wood. Glued board lasts longer and therefore costs a little more. But in general, if the floor is not laid in a damp room, then a solid board can also last a long time, so this is a good option for rooms where it is not wet or dry.
These are solid wood planks 15-22 mm thick, 40-75 mm wide, and 500 mm long. Block parquet is made of oak, ash, maple, Merbau, rosewood, and ironwood. Parquet is renowned for its durability, thermal insulation, sound insulation, and wears resistance. Parquet can be used to layout various designs and patterns on the floor, so it is often chosen in apartments with designer renovation.
The parquet board externally imitates the block parquet. It consists of natural wood of valuable species. Its difference from block parquet is its multi-layer and lock connection. The presence of the lock allows you to lay it directly on the substrate without glue – like a laminate. The board differs from block parquet in size and structure. The size of a parquet board is usually 120 mm in thickness and 200 mm in width. Its length is 250 mm.
Its main advantage is complete readiness for styling. Another of the “pluses” of the material: it can be laid on a “warm floor” and tolerates temperature changes well within the normal range.
Unfortunately, parquet flooring is less durable than block parquet. It is easy, for example, to push through with a heavy object. Also, if the block parquet can be changed and looped many times, then the board – a maximum of two times.
It is very environmentally friendly and pleasant to the touch. The cork is very light. It isolates sound and noise well. The cork cover keeps the warmth indoors, which is very suitable for the cold climate of Interior designers in Pakistan. The surface is soft and elastic. Therefore it is prescribed for children and people with problems with the musculoskeletal system. The surface of the cork does not slip, does not absorb liquids, and does not emit harmful substances. The pin is easy to care for; moreover, it repels dust.
The cork does not rot and is not afraid of moisture. Air passes freely through it, so it is easy to breathe in cork rooms. The only drawback of the material is that it squeezes under the weight of heavy objects, and dents can remain on it from high heels.
There are three types of cork coverings:
This is a type of floor screed that uses self-leveling mixtures. The minimum thickness of the self-leveling floor is 3.5 mm. There are two types of self-leveling floors:
the topcoat (it becomes the floor);
a fast-setting cement or gypsum-based screed, on which the floor covering is then applied (parquet, tiles, linoleum, and so on).
The point of the self-leveling floor is that it self-aligns to a perfectly horizontal plane. And it’s pretty easy to mount.
A durable, moisture-resistant, and wear-resistant type of coating. Most often, ceramic tiles are laid in the bathroom or the kitchen but sometimes can find it in the living room and the bedroom (mainly if the apartment or house is located in the south). It is delightful to step on the cool tiles on hot days. If the apartment is located in cold areas, can install a heating system under the tiles.
You can lay ceramic tiles on any surface; the main thing is that they are rigid and even.
It is difficult to mount the tiles, but the “plus” is that having laid it once, you can forget about the repair for a long time. The tiles are easy to clean, do not fade in the sun, and are not afraid of water. The tile can crack if you put something heavy on it, but the advantage is that the broken segment is easy to replace with a new one.
This material is similar in appearance to ceramic tiles, but it is more expensive. It is more wear-resistant than ceramic and also more frost-resistant and denser. It makes sense to tile a balcony or porch with porcelain stoneware, that is, parts of the house on the street. In a home where it is warm, you can put ordinary ceramic tiles.
It was invented in Japan about ten years ago. This is a new durable and moisture-resistant material. Quartz vinyl tiles are laid in children’s rooms, living rooms, and bedrooms. Each tile has four layers. Sand with petroleum products is applied to the vinyl substrate – this is the quartz vinyl layer. A printed film is placed on top, which is covered with polyurethane and PVC. You can lay the tiles yourself. The Interior designers advantage is that it is compatible with the “warm floor.”
Such a coating is rarely found in designer apartments; however, it is also used in rare cases. Linoleum is a polyvinyl chloride with a felt or foam base. There are three types of material:
This covering is made from natural and synthetic fibers; the length of the pile can be different: long and short. Carpet is usually inexpensive. It is pleasant to the touch and is used in living rooms and bedrooms. Its big drawback is the difficulty of cleaning. It collects dust quickly and is not suitable for allergy sufferers. Another of the “minuses” – it quickly loses its beautiful appearance, fades. But it is not difficult to lay it: simple installation.
Lyubov Trofimova, an invited expert, says: “The carpet is soft and pleasant, but difficult to maintain. Accumulated dust and wool in the composition can cause allergies. “
Unlike natural carpet, the synthetic carpet does not absorb dust: all dirt remains on the surface and can be easily removed with a vacuum cleaner. It keeps its presentation longer than the natural carpet.
The artificial carpet does not emit any static electricity or any toxins. Synthetic carpet does not Interior designers.
For home use, a natural carpet is suitable – you can put it in the bedroom. But for a public space to use a synthetic rug because it can withstand higher loads.
Tahir’s architects says: “In the bathrooms, porcelain stoneware is usually used. It is durable and not afraid of water. Quartz vinyl is also appropriate: it is also not scared of water. We typically use it in small apartments if the owners want the same coverage in all rooms. It looks pretty impressive. In the kitchen, we use porcelain stoneware, quartz vinyl, waterproof laminate in the rooms, and the customer’s discretion. Usually, they choose parquet, laminate, engineered board.
We rarely use self-leveling floors. It is suitable if the customer wants a monochrome interior designers in Pakistan: white walls and a glossy white base. “
“The bathrooms usually use porcelain stoneware. It is durable and not afraid of water. Quartz vinyl is also appropriate: it is also not scared of water. We use it more often in small apartments if the owners want the same coverage in all rooms. It looks pretty impressive best architect in Lahore.
In the kitchen, we most often use porcelain stoneware, quartz vinyl, waterproof laminate in the rooms, and the customer’s discretion. Usually, they choose parquet, laminate, engineered board. “
“If there is an opportunity to buy more expensive materials, then we choose interior designers parquet and engineered planks for the rooms. If not, laminate. Also, the price of this or that material depends on the design, manufacturer and other factors: a laminate can cost 1000 rubles per square meter, or maybe 4500 “.